USB TnH SHT10 TypeA 160
USB-TnH (SHT10) is a USB temperature + humidity sensor. The temperature and humidity are read by simple ASCII commands via the CDC Virtual Serial port (Atmel). It make the programming more simple compare with other USB communication method.

The sensor PCB has re-layout and fit into a USB Dongle plastic case.


Specifications

Operating Temperature (CPU): -20°C ~ +70°C
Connection to PC: USB (CDC Virtual COM port)
Power: USB Powered
Temperature Accuracy: +/-0.5°C at 25°C (max +/-3°C at 120°C)
Temperature Resolution: 14bits
Temperature Range: -40°C to 120°C
Humidity Accuracy: +/-4.5 %RH
Humidity Resolution: 12bits
Humidity Range: 5 %RH - 95 %RH

Features

  • USB Type A Plug.
  • Simple ASCII command.
  • Using Atmel MCU as CDC Virtual Serial Port. (Using usbser.sys at Windows).
  • Using SHT10 (a single chip sensor) for temperature/humidity sensing.

Package Content:

  • USB-TnH TypeA (SHT10) Sensor

 


Shipping and Payment:

  • Accept PayPal Only
  • Worldwide shipping via Airmail

 


Sensor

USB TnH SHT10 TypeA Sensor320

Running on Android phone via OTG adaptor

USB TnH SHT10 TypeA Android

Command Line Interface (Windows)

cli msw

Command Line Interface (Linux)

cli linux

VisualBasic Demo

This example is for Visual Basic 2010 Express which is is free and you can download it from Microsoft.
http://www.microsoft.com/visualstudio/en-us/products/2010-editions/visual-basic-express

VBDemo USB TnH SHT10


Serial command

Please open the serial port with baud rate at 115200 and data format as N81. All commands are in ASCII.
Action Command Response
Get Model Name GI\n USB-TnH SHT10\n
Get Version GV\n V2.00\n
Get Temperature GT\n 020.5\n
Get Humidity GH\n 045.7\n
Get Unit Name
  Default is "SENSOR", can set by user.
GN\n SENSOR\n
Set Unit Name
  Up to 8 characters, stored at EEPROM.
N=name\n OK\n
Turn off LED Indicator
  Will restore to "Turn on" after restart
I=0\n OK\n
Turn on LED Indicator (V1.02) I=1\n OK\n

Resources

 

Please publish modules in offcanvas position.